recycling of waste engine oil

Distillation is the process involving the conversion of a liquid into vapor that is subsequently condensed back to liquid form. In the application for recycling of waste engine oil and processing of pyrolysis oil, the feedstocks are heated to become gas state then the gas gets liquified by condensing and becomes liquid fuel. In the distillation process, the impurities are removed from the feedstocks.

production ratio

The production ratio of output products depend on the conditions of raw materials, such as its content of water and impurities.

0%
HEAVY DIESEL

Used as industrial fuel for cement plant, steel plant, metallurgical plant, glass plant, power plant etc.

0%
SYNGAS

Known as combustible gas or non-condensable gas. Routed to gas burners of heating system as fuel supply.

0%
SLAG

running process

Typical procedure to process waste engine oil.

  • Feeding Of Waste Engine Oil

Loads waste engine oil into reactor through the feeding port using an oil pump.

  • Starts Heating

After loading is finished, starts heating the distillation reactor.

  • Oil Production

Liquid feedstocks becomes gas state under high temperature. Then oil gas gets out from reactor. Oil gas passes through purifier and gets purified. Then oil gas passes condenser and gets liquified and becomes liquid oil. Output oil gets collected in oil tank. Non-condensable gas is routed to heating system as fuel supply.

  • Purification Of Flue Gas

Flue gas generated from heating system is purified by emission control system before emission from chimney.

  • Cooling Down

When oil production is finished, leaves the machine to cool down for 3 hours before discharging.

  • Discharging Slag

Discharges slag from reactor using a customized tool.

Model A series

  • Unit Capacity: 2/5/10 tons
  • Basic choice to start
  • Medium emission control
  • Onsite installation

Model C series

  • Unit Capacity: 2/5/10 tons
  • Advanced choice
  • High emission control
  • Quick installation

Model F series

  • Unit Capacity: 750/4000kg
  • Installation-FREE
  • Low shipping cost
  • Modular design

Model M series

  • Unit capacity: 10kg
  • Mini scale model
  • Fully operational
  • Installation-FREE